3Com 3CRWPS10075-US - OfficeConnect Wireless 54Mbps 11g Print Server, User Manual

Page: 14 / 94

14 C
HAPTER
1: I
NTRODUCTION
Safety Instructions
For your own safety, and to protect your Print Server, please observe the
following safety advice.
1 Unplug this device from its power source before cleaning. Use only a
slightly dampened cloth for cleaning. Do not use liquid or aerosol
cleaners.
2 Avoid using this product near water. Exposure to water poses an
electric-shock hazard.
3 Do not place the Print Server on an unstable surface. The device may fall
causing serious damage to the device.
4 This device should only be used with the power supply type specified on
the marking label. If you are not sure of type of your local power supply,
consult your dealer or the local power company.
5 Do not pinch, crimp or otherwise damage the power cord. If exposed to
foot traffic, ensures that the cable is properly shielded and does not pose
a tripping hazard.
6 If using an extension cord, makes sure the total ampere rating of the
products using the cord does not exceed the extension cord's ampere
rating.
7 Do not attempt to service this device, as opening or removing casing may
expose you to dangerous voltage points or other risks. Refer all servicing
to qualified service personnel.
8 The Print Server should be serviced by qualified service personnel under
the following conditions:
■
The power cord is damaged or frayed.
■
Liquid has been spilled onto the product.
■
The product has been exposed to rain or water.
■
The product does not operate normally in accordance with the
operating instructions.
■
The device has been dropped or the casing has been damaged.