3Com 3C8S5007 - SuperStack II PathBuilder S500..., User Manual

Page: 143 / 190

G
C
OMPLETING
T
HE
U
LTRA
-WAN
C
ONFIGURATION
This appendix provides templates for finishing the configuration of the
Ultra-WAN connectors.
These templates are also available in a file on the Enterprise OS 11.3.1.
documentation CD-ROM and from the following 3Com Support URL:
http://support.3Com.com/infodeli
It is recommended that you access the 3Com web site for the latest
version of these templates.
Overview
UltraWAN CSU/DSU connectors are not preconfigured before product
shipment.
Due to the significantly different ways these interfaces can be used, you
must finish the connector configuration when initially configuring or
reconfiguring the model S590, S598 or S599 PathBuilder switch. This
appendix provides templates to assist in this configuration.
The commands provided in these templates can be entered manually,
used in a configuration script, or inserted into a boot.cfg file and placed
in the a:/primary directory of the flash file system on the model S590,
S598 or S599 PathBuilder switch. Then, each time the switch is booted
with a boot.cfg file, these commands will be executed, providing
completely configured Ultra-WAN connectors without further user
intervention.
WARNING: Presence of a boot.cfg file in the boot directory will cause all
ccs files to be erased. To avoid this erasure, rename the boot.cfg file after
the initial system boot.