3Com 3C8S5007 - SuperStack II PathBuilder S500..., User Manual

Page: 114 / 190

114 A
PPENDIX
E: T
ROUBLESHOOTING
When using Flash Load to recover a system, the image is always written
to A:/primary/boot.ppc. If the system primary boot source config directory
parameters were set to boot from another area, the BT command will fail
because it will try to boot from the other area. Use the bt
A:/primary/boot.ppc command to boot the system. Reset the boot
pointers using the SF command. See Appendix F for more information.
Help
Syntax
H
or
?
Description
The Help command lists all available commands in the boot monitor
along with syntax parameters.
Repeat Last
Command
Syntax
!
Description
The ! command repeats the last command entered.
Self Test
Syntax
ST
Description The ST command sets the self-test action to one of the following
options:
1. Quick
2. Full