Changing Software Option Settings
3-13
A screen identifying the adapter then appears with the
Test menu bar item highlighted.
a
Use the left arrow key to select the Install menu bar item.
The Configure Adapter option will be highlighted.
b
Press [Enter],
4 Press [Tab] several times to highlight the first option in
the main dialog box, and use the arrow keys to highlight
the parameter option you want to change. Press [Enter].
A second dialog box appears.
5 Use the arrow keys to scroll through the list of settings for
that option. Select a setting and press [Enter],
6 Continue this procedure for any of the other parameter
options.
Refer to the on-line help (using [FI] when the option is
highlighted) for more information about each of the settings.
7 Press [Tab] to highlight <OK>. Press [Enter],
You must highlight <OK> and press [Enter] to save the new
settings to the adapter.
fcw
If you want to use the same settings on other adapters, you
3^
can save the configuration settings to a file. Select <Save>
under <File Options> in the Adapter Configuration dialog
box. For example, type:
D :\CONFIG\3C5xx.SET
where
xx
represents the last two digits o f the adapter number.
This saves the settings to the default file 3C5XX.SET in the
CONFIG directory in drive D. Refer to the on-line help (using
[FI]) for more information.
