Configuring Multiple Adapters
3-5
Configuring Multiple Adapters
If you have installed more than one adapter in an ISA computer,
follow the steps below to configure the adapters.
C o n fig u rin g th e First A d a p te r
After you have started the
EtherDisk
diskette program, as
explained in steps 1 through 5 in the previous section,
"Using the AutoLink Program," follow the steps below:
1 When the main menu appears, select
Configuration/Diagnostic/Troubleshooting.
2 Select Configuration and Diagnostic Program from the
next screen.
A screen appears that is similar to the one shown in Figure 3-3.
[ENTER]=<Select>
[Alt]+<Highligbted Key>=Execute Function
[ t l ]
»Scroll
[TAB]“Next Field [SHXFT+TAB]“Previous Field [FI]“Help [ESC]=<fiuit>
Figure 3-3
Main Window with Multiple Adapters
3 Highlight the adapter you want to configure by using the
arrow keys. Then press [Enter], or tab to the <Select>
command button and press [Enter].
A screen appears, showing your selection.
