3Com 3C421600A, Management Manual

Page: 110 / 300

108 C
HAPTER
7: LAN-
TO
-LAN R
OUTING
7 Configure phone numbers.
set user main _office phone_number 5085556666
8
Configure authentication.
set ppp receive_authentication pap
set system transmit_authentication_name branch_office
9 Save your work.
save all
Strategy 2 (unnumbered link)
Configuring the RAS1500 in the Main Office:
f an IP network has been defined, configured, and enabled on the RAS
1500, steps 1 through 3 are not necessary.
1 Add an IP network.
add ip network ipnet-1 address 192.112.226.1/C interface
rm0/eth:1
2 Add a user.
add user branch_office password chicago type network,dial_out
set user branch_office idle_timeout 300
3 Configure the user network parameters.
set network user branch_office address_selection specified
remote_ip_address 192.112.227.1/C
set network user branch_office ipx disable appletalk disable
bridging disable
set network user branch_office send_password boston
4
Configure the user dial-out parameters.
set dial_out user branch_office site type ondemand
5 Configure the user routing parameters.
set network user branch_office ip_routing both rip ripv1