3Com 3C421600A, Management Manual

Page: 128 / 300

126 C
HAPTER
9: C
ONFIGURING AN
IP T
ERMINAL
S
ERVER
Case Study B This case study assumes the following:
■
The user has set up a terminal emulation session such as the Windows
HyperTerminal with a phone number and standard communications
parameters.
■
The IP network is configured.
■
All other settings remain at factory defaults.
■
A DNS server is configured.
Follow these steps to configure the login host and user:
1 Add a user “Jill” of user type login, login service of rlogin, and a
password. Use the following command:
add user jill type login password hill login_service rlogin
2 Add a login host for Jill to access. Use the following command:
add login_host granite address 195.112.133.10 pref 1
3 Configure Jill to specifically access Granite. Use the following command:
set login user Jill host_type specified login_host_ip_address
195.112.133.10
4 Save your work.
save all
When Jill dials in, she is prompted for a login name/password as shown
below.
Welcome to 3Com RAS 1500 (TM)
login:
password:
After Jill is successfully authenticated, she is connected to the host and
prompted for a username and password.
Example:
Trying 195.112.133.10...
Connected to 195.112.133.10.
Hummingbird Communications Ltd., Telnet Daemon V5.1
Username: jill
Password:
Microsoft(R) Windows 95
(C)Copyright Microsoft Corp 1981-1995.
Granite:\>