3Com 3C421600A, Management Manual

Page: 30 / 300

28 C
HAPTER
2: U
SING THE
C
OMMAND
L
INE
I
NTERFACE
3 Type the following:
config
A display similar to the one shown below appears:
File server name: USR_SERVER_ONE
IPX internal network number: 0000000A
Western Digital Star EtherCard PLUS Driver v2.05 (910424)
Hardware setting: I/O Port 300h to 31Fh, Memory CC000h to
Cffffh, Interrupt Ah
Node address: 0000C0488D28
Frame type: ETHERNET_802.3
Board name: TENBASE_802.3
LAN protocol: IPX network 00000255
Western Digital Star EtherCard PLUS Driver v2.05 (910424)
Hardware setting: I/O Port 300h to 31Fh, Memory CC000h to
Cffffh, Interrupt Ah
Node address: 0000C0488D28
Frame type: ETHERNET_802.2
Board name: TENBASE_802.2
LAN protocol: RPL
LAN protocol: IPX network 00000684
This is an example of the information returned for one version 3 .xx card
that has two different frame types. The card has one port address, but
two LAN protocol network addresses, one for each frame type. The
network number for 802.3 is 00000255, and for 802.2 it is 00000684.
4 Write down the LAN protocol IPX network number for the frame type you
want to use.
For File Servers Running Novell Version 2.xx
Use the following steps to configure file servers running Novell version
2.
xx :
1 Go to the console of a file server that is on the same network segment as
the RAS 1500.
2 Press C-E until the colon (
:
) prompt appears.