3Com 3C421600A, Management Manual, Page: 55 / 300

Configuring Your System For DialOut/IP Software
53
3 Click OK. A Telnet session starts.
4 In the Telnet window, type AT , then press Enter.
■
If the response is “OK,” the port is configured correctly for dial-out
using DialOut/IP.
■
If the connection is unsuccessful, or if a “login” prompt appears, the
port is configured incorrectly for dial-out using DialOut/IP. Review the
previous steps and try again.
Example 1: Dial out using all modems
To enable dial-out on all modems in the RAS1500, using the default
modem group “all,” issue the following commands (line breaks added for
readability):
Use the “all” modem group only if every modem port on the 1500 is
connected to a telephone switch, central office, or PBX.
set modem_group all access two_way
add network service dialout_service server_type telnetd
socket 6000 data
auth=off,service_type=dialout,modem_group="all"
set dial_out security no
save all
Example 2: Dial out using the first four modems
To enable dial-out for the first four modems on the RAS 1500, issue the
following commands (line breaks added for readability):
add modem_group dialout_modems interface rm0/slot:1/mod:[1-4]
set modem_group dialout_modems access two_way
add network service dialout_service server_type telnetd
socket 6000 data
auth=off,service_type=dialout,modem_group="dialout_modems"
set dial_out security no
save all