3Com 3C421600A, Management Manual

Page: 118 / 300

116 C
HAPTER
8: B
RIDGING WITH THE
RAS 1500
b Disable all protocols not used on your network:
set network user [username] ipx disable appletalk disable
Bridging IP does not work if you add an IP network to the Ethernet
interface.
c Enable bridging for the FCP user:
set dial_out user [username] site bridge enable
d Configure FCP username and password:
set network user [username] send password
e Enable the user on the network:
add bridge network [username] interface rm0/eth:1 user
[username] enable yes
3 Set dial-out settings for the user:
a Associate a user with the modem group:
set user [username] modem_group 12
b Set the user phone number:
set user [username] phone [phone number]
c
Set the user alternate phone number:
set user [username] alternate [phone number]
d Add a bridge and associate a user with it:
set dial_out user [username] site type ondemand
4 Enable the user:
enable user [username]
5 Configure MultiLink FCP:
set network user [username] fcp max_channels 2
6 Configure compression settings:
set network user [username] fcp compression [STAC | None]
7 Save your work.
save all
Compression is enabled by default in the user profile and no additional
command needs to be issued, although there is a command that can be
used in case compression is either required to be turned off or later
turned on.