3Com 3103 - NBX Manager VoIP Phone, User Manual

Page: 129 / 148

Opening the 3105 Attendant Console Label Cover 129
3 Labels — You can print labels for your Attendant Console using the
LabelMaker forms in the NBX NetSet utility or on the NBX Resource Pack
CD . See “Printing Labels” in Chapter 5 .
4 Transfer button — Enables you to send a call to another telephone. See
“Transferring a Call” in Chapter 4 .
5 Direct Mail Transfer button — Allows you to send a caller directly to
another user’s voice mailbox or phantom mailbox. See “Direct Mail
Transfer” in Chapter 4 .
6 Call Park button — Places a call in a “holding pattern” so that it can be
retrieved from any other telephone on the system. See “Call Park” in
Chapter 6 .
7 Hold button — Places a caller on hold. See “Putting a Call on Hold” in
Chapter 4 .
Attendant Console
Labels
To create, print, and save labels for your Attendant Console, see “Printing
Labels” in Chapter 5 .
Opening the 3105
Attendant Console
Label Cover
After you print the labels and then cut them out, remove the plastic cover
from the Attendant Console by pulling up on the two tabs at the top of
the Attendant Console until the top of the cover pops off.
Figure 9 3105 Attendant Console Label Cover Tabs