3Com 3103 - NBX Manager VoIP Phone, User Manual

Page: 80 / 148

80 C
HAPTER
5: P
ERSONALIZING
Y
OUR
T
ELEPHONE
Resetting the Off-Site Notification Cycle
When you log in to your voice mailbox and hang up or log out (regardless
of whether you listen to or delete messages), you start the off-site
notification cycle again. You will be notified about the next message that
comes into your voice mailbox.
Managing Off-site
Notification Using the
Telephone
To manage your off-site notification settings directly through the
telephone:
1 Log in to your voice mailbox at your telephone or remotely.
2 Press 9 .
3 Press 4 , select one of these options, and follow the prompts:
Do Not Disturb
When the Do Not Disturb feature is in effect, calls coming in to your
telephone immediately go to your default call coverage point without
ringing. You set the default call coverage point from the NBX NetSet
utility by going to
Call Forward > Call Forward . See “Forwarding
Incoming Calls” in Chapter 4 .
If Call Forward All is in effect, it overrides Do Not Disturb. Calls go to the
call coverage point defined for Call Forward All in the
Call Forward >
Call Forward Override page.
You may be able to map the Do Not Disturb feature to an available
Access button on your 3Com Telephone (see the
“User Button
Mapping” section, or you can use the Feature Code to enable and disable
the feature.
When Do Not Disturb is in effect:
■
It overrides Call Forward No Answer, Call Forward Busy, and FWD
MAIL.
Button Description
1 Enable off-site notification.
2 Disable off-site notification.
3 Change off-site notification settings.
4 Review current off-site notification settings.
Return to the main menu.
*