3Com 3103 - NBX Manager VoIP Phone, User Manual

Page: 103 / 148

Supervisory Monitoring 103
the Privacy List domain set by the administrator ensures that all calls
associated with this user cannot be monitored.)
The NBX administrator can enable or disable Call Privacy for each Class of
Service (CoS) user group.
If your administrator assigned you to a CoS group that allows Call Privacy,
you can use Feature code 428 to prevent your current call from being
monitored. To see if you can activate Call Privacy, log in to the NBX NetSet
utility and go to
My Calling Privileges > Call Permissions . You are
allowed to activate Call Privacy if the Call Privacy feature is enabled.
You can activate Call Privacy before a call (for example, by going off-hook
and dialing Feature code 428 and then dialing an internal or external
call), or during a call (for example, dialing Feature code 428 after
answering an incoming call). The administrator may also map Feature
code 428 to one of your telephone system access buttons.
To activate Call Privacy using a 3Com Manager’s Telephone:
1 Press the Features soft button.
2 Scroll to Call Privacy .
3 Press Select .
■
The message “CALL PRIVACY ON” appears on the display panel to
indicate that Call Privacy is enabled.
In the case of an incoming call, Call Privacy cannot be activated while the
session is alerting. In this case, you must answer the incoming call before
activating Call Privacy.
To deactivate (toggle off) Call Privacy using a 3Com Manager’s Telephone:
1 Press the Features soft button.
2 Scroll to Call Privacy .
3 Press Select .
■
The message “CALL PRIVACY OFF” appears on the display panel to
indicate that Call Privacy is disabled.
When any active Call Privacy session ends, (for example: you activate Call
Privacy, initiate a call, and then exit the call) the Call Privacy settings are
no longer applicable and the next call is open to monitoring.