2N TELEKOMUNIKACE a.s., www.2n.cz
64/143
Caution
The
selection has a higher priority than
Locked – peer to FXS channel
the LCR table. All outgoing/incoming calls are locked in the GSM-FXS
channel pair. The GSM channel is selected cyclically for outgoing VoIP
calls.
The
Smart – least used minutes and Smart – most remaining minutes
rules are useful where different limit settings are used for SMS.
Count of digits dialled from VoIP
Minimum digits from VoIP – minimum count of digits to be dialled into GSM.
Maximum digits from VoIP – maximum count of digits to be dialled into GSM.
Wait for next digit [s] – timeout during which
awaits further
2N VoiceBlue
®
MAX
digits dialled from VoIP to GSM.
Note
Number of digits dialled from FXS line is a parameter used for GSM
/UMTS calling in case the
is set to
Port modes
Locked – according to
. For other
options, the
set in the
used ASL
Port modes
Count of digits
defines the maximum count of digits to
Gateway configuration/ Prefixes
be dialled.
Calls
Relax timeout [s] – time interval between the end of the last call and the
beginning of the next call via one and the same GSM module (all incoming and
outgoing calls are rejected during this timeout). The recommended value is 2
seconds. Do not change this setting unless absolutely necessary.
Timeout for ringing to GSM [s] – ringing timeout for outgoing calls to GSM. If not
answered or terminated within this timeout, the call will be terminated
automatically by the gateway when this timeout elapses.
Source interface for CallBack – select the CallBack source interface for CallBack
routing. The LCR table must include the appropriate outgoing traffic rule: if, for
example, a VoIP port is the CallBack source interface, routing from VoIP to GSM
must be defined in the LCR.
Delay for fast CallBack [s] – set the delay between the CallBack request and
outgoing call if Auto end to CallBack request is active.
Bank holiday list
