2N VoiceBlue MAX User Manual Download Page 23

Page: 23 / 143

2N TELEKOMUNIKACE a.s., www.2n.cz

23/143

Single Mounting

Follow the instructions below to mount a single unit into a system rack:

Fit the rack wings to the right and left sides using four screws for each wing

(included in the package). The positions of the long and short wings are optional

and depend on the installation site conditions.

Having screwed the wings, place the GSM gateway into a free 1U place of the

system rack fitting it with four rack screws (included in the package).

Pair Mounting

Follow the instructions below to rack mount two GSM gateways into one 1U place:

Put the GSM gateways next to each other making their sides touch each other.

Fit the short wings (included in the package) onto the free gateway ends with

the screws enclosed.

Summary of Contents for VoiceBlue MAX
















































































































































Search results

Summary of Contents for VoiceBlue MAX

Reviews:

Related manuals for VoiceBlue MAX

Brands by name

Popular brands

2N VoiceBlue MAX, User Manual

Search results

Summary of Contents for VoiceBlue MAX

Reviews:

Related manuals for VoiceBlue MAX

Brands by name

Popular brands