2N TELEKOMUNIKACE a.s., www.2n.cz
77/143
List of called numbers
List of dialled numbers if DTMF dial-in was not used. Search the table from top to
bottom. If the called user is inacessible, use the following table record.
Prefixes
The window helps you adapt the gateway to calling to variable GSM networks. You
can set the prefix-based call routing rules here and identify up to sixteen different
groups for routing.
Prefix list 1–16
Sixteen prefix groups to be assigned in the LCR table.
Basic settings
GSM network ID – name the prefix list for convenience.
Default count of digits – the default length of the number to be dialled into GSM
/UMTS when routing via the selected prefix list. Use this parameter if the Count
parameter is not included in the
.
of digits
Table of accepted prefixes
Note
The number to be dialled to the GSM/UMTS network must meet the
condition.
Count of digits
For
calls, the count of digits to be dialled must be equal to or
VoIP
higher than the value set in the
.
Count of digits
For calls via the
interface, the
defines the maximum
FXS
Count of digits
count of the digits to be dialled.
Table of replaced prefixes
This table helps you change the prefix of the number received (from 00 to +, e.g.).
You can just add or remove a prefix using this table. This change is performed before
the prefix table search is initiated. Keep the „"/ „" record at least in the table for a
proper function.
