2N VoiceBlue MAX User Manual Download Page 25

Page: 25 / 143

2N TELEKOMUNIKACE a.s., www.2n.cz

25/143

Caution

The rear and upper connecting plates have different holes – the upper
plate holes are larger and without threading.

Make sure that the plate does not get into the device to avoid electric
short-circuit inside the GSM gateway.

Leave 2 cm free space at least over and under the GSM gateway for
better ventilation (airflow)!

Power Supply Connection

Use only the power supply adapter included. Make sure that the electric distribution

network voltage is in compliance with the data on the supply adapter plate before

plugging the adapter. First plug the supply adapter into the mains socket and only

then connect the adapter connector to the gateway. Refer to the

status indicators

Warning

Connecting a defective or inappropriate power supply adapter may lead

to a temporary or permanent

error!

2N VoiceBlue MAX

Check whether the antenna is connected before plugging the adapter.
Feeding the device without antenna connection may result in the GSM
module transmitter damage.

Summary of Contents for VoiceBlue MAX
















































































































































Search results

Summary of Contents for VoiceBlue MAX

Reviews:

Related manuals for VoiceBlue MAX

Brands by name

Popular brands

2N VoiceBlue MAX, User Manual

Search results

Summary of Contents for VoiceBlue MAX

Reviews:

Related manuals for VoiceBlue MAX

Brands by name

Popular brands