2N IP series Automation Manual Download

Page: 81 / 104

2N TELEKOMUNIKACE a.s., www.2n.cz

81/104

FlipFlopRS

The

block is a one-bit memory cell (output parameter), whose state

FlipFlopRS

changes to 1 or 0 at the rise of defined events. The FlipFlopRS output can be used as a

condition for action control in rather complex

applications. It is a

Automation

simulation of an RS-type flip-flop circuit.

Input parameters

Set – define the event to set the condition into the 'met' state (1).

Reset – define the event to set the condition into the 'not met' state (0).

ResetValue – set the condition default value upon restart. The parameter is
optional.

Valid values:

0 – condition is not met (default value)

1 – condition is met.

Output parameters

Out

Example

The condition is met at the rise of event 1 and not met at the rise of event 2:

Summary of Contents for IP series









































































































Search results

Summary of Contents for IP series

Reviews:

Related manuals for IP series

Brands by name

Popular brands

2N IP series, Automation Manual

Search results

Summary of Contents for IP series

Reviews:

Related manuals for IP series

Brands by name

Popular brands