2N IP series Automation Manual Download Page 25

Page: 25 / 104

2N TELEKOMUNIKACE a.s., www.2n.cz

25/104

CardHeld

The

block defines the event generated by holding of the RFID card with the

CardHeld

defined ID (for RFID card reader models only). The event is generated by holding the

RFID card for 4s at the RFID card reader.

Input parameters

Card – define the RFID card ID; refer to the Card Reader subsection in the

Configuration Manual

Valid values:

valid – any valid card (included in the intercom card list)

invalid – any invalid card

any – any valid or invalid card

SuppressTones – suppress sound signalling initiated by detection of an invalid
card. The parameter is optional.

Valid values:

disabled – tones are not suppressed

enabled – tones are suppressed (default value).

Reader – define used card reader / module

Valid values:

internal_cardreader – internal card reader (

)

Vario, Force

external_cardreader – external card reader (

)

IP Vario, Force

<module_name> – module name configured in the Module Name
parameter in the Hardware / Extenders / Modules / Used module

menu (

)

IP Verso

any – any reader / module

The parameter is optional, the default value is

any

Direction – define direction

Valid values:

in – reader with defined incoming direction

out – reader with defined outgoing direction

any – both directions

The parameter is optional, the default value is

any

Output parameters

Summary of Contents for IP series









































































































Search results

Summary of Contents for IP series

Reviews:

Brands by name

Popular brands

2N IP series, Automation Manual

Search results

Summary of Contents for IP series

Reviews:

Brands by name

Popular brands