2N IP series Automation Manual Download Page 23

Page: 23 / 104

2N TELEKOMUNIKACE a.s., www.2n.cz

23/104

CardEntered

The

block defines the event generated by tapping (swiping) of the RFID

CardEntered

card with the defined ID (for RFID card reader models only).

Input parameters

Card – define the RFID card ID; refer to the Card Reader subsection in the

Configuration Manual

Valid values:

valid – any valid card (included in the intercom card list)

invalid – any invalid card

any – any valid or invalid card

SuppressTones – suppress sound signalling initiated by detection of an invalid
card. The parameter is optional.

Valid values:

disabled – tones are not suppressed

enabled – tones are suppressed (default value).

Reader – define the card reader / module to be used

Valid values:

internal_cardreader – internal card reader (

)

Vario, Force

external_cardreader – external card reader (

)

IP Vario, Force

<module_name> – module name configured in the Module Name
parameter in the Hardware / Extenders / Modules / Used module

menu (

)

IP Verso

any – any reader / module

The parameter is optional, the default value is

any

Direction – define direction

Valid values:

in – reader with defined incoming direction

out – reader with defined outgoing direction

any – both directions

The parameter is optional, the default value is

any

Summary of Contents for IP series









































































































Search results

Summary of Contents for IP series

Reviews:

Brands by name

Popular brands

2N IP series, Automation Manual

Search results

Summary of Contents for IP series

Reviews:

Brands by name

Popular brands