manualshive.com logo in svg

2N IP series, Automation Manual

Share
Download
2N IP series Automation Manual Download Page 56

2N TELEKOMUNIKACE a.s., www.2n.cz

56/104

StartMulticastSend

The 

 block defines the starting action for audio stream sending to a 

StartMulticastSend

multicast IP address. You can control up to four independent transmission channels. 

The RTP/UDP protocol is used.

Parameters

 – define the event to launch this action.

Event

 – define the condition to be met for the action to be executed. This 

Condition
parameter is optional.

 – define the channel number (0–3) to be controlled.

Channel

 – define the audio stream multicast IP address.

Address

 – define the UDP port to which audio stream shall be sent.

Port

 – define the audio source.

Source

Valid values:

 – the audio source is the microphone.

mic

 – the audio source is the call.

call

The parameter is optional; the default value is 

.

mic

 – define the audio codec to be used.

Codec

Valid values:

 – codec G.711 u-law

pcmu

 – codec G.711 A-law

pcma

 – codec G.729

g729

 – codec G.722

g722

 – codec L16, 16 kHz

l16

The parameter is optional; the default value is 

.

pcmu

Example

Start  audio  stream  sending  via  channel  1  to  address  239.0.0.1:10000  if  the  event 

defined on row 2 arises:

Summary of Contents for IP series









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands