2N IP series Automation Manual Download

Page: 63 / 104

2N TELEKOMUNIKACE a.s., www.2n.cz

63/104

ControlRtpStream

The

block defines the action that controls the flow of the RTP

ControlRtpStream

streams. This action controls only call streams; multicast streams are not affected by

this action.

Parameters

– define the event to launch this action.

Event

– define the condition to be met for the action to be executed. This

Condition
parameter is optional.

– define the call RTP stream playing direction.

Direction

Valid values:

– incoming stream to the intercom

– outgoing stream from the intercom

out

– incoming and outgoing stream.

both

The parameter is optional; the default value is

both

Operation – define the RTP stream operation.

Valid values

mute – mute the stream.

unmute – unmute the stream (stream is played).

Example

Mute call streams in both ways if the event defined on row 2 arises:

Summary of Contents for IP series









































































































Search results

Summary of Contents for IP series

Reviews:

Related manuals for IP series

Brands by name

Popular brands

2N IP series, Automation Manual

Search results

Summary of Contents for IP series

Reviews:

Related manuals for IP series

Brands by name

Popular brands