2N IP series Automation Manual Download

Page: 29 / 104

2N TELEKOMUNIKACE a.s., www.2n.cz

29/104

InputChanged

The

block defines the event generated by a change of the logic level on

InputChanged

the defined digital input.

Input parameters

Input – define the logic input.

Valid values:

tamper – tamper switch input

input1 – digital input 1

input2 – digital input 2

cr_input1 – digital input 1 on card reader

cr_input2 – digital input 2 on card reader.

There may be different lists of valid values for different

intercom

2N IP

models; refer to the Available Digital Inputs and Outputs subsection.

Edge – define the detected change on the digital input.

Valid values:

falling – falling edge, change from log. 1 to log. 0

rising – rising edge, change from log. 0 to log. 1.

The parameter is optional, the default value is

rising

Output parameters

Event – the Event invoke connected Event or Action.

Output – the detected ID of the input whose change was the last to generate
this event. The options correspond to the Input parameter values.

Edge – the detected edge change which was the last to generate this event. The
options are falling or rising.

Example

Event generated by disconnection of the tamper switch (device opening):

Summary of Contents for IP series









































































































Search results

Summary of Contents for IP series

Reviews:

Related manuals for IP series

Brands by name

Popular brands

2N IP series, Automation Manual

Search results

Summary of Contents for IP series

Reviews:

Related manuals for IP series

Brands by name

Popular brands