2N Access Unit Configuration Manual
89
/
134
•
•
1.
2.
3.
Tamper Activated Message
–
set the message to be sent to the specified e-mail address
whenever the tamper switch is activated.
Subject
– set the e-mail subject to be sent.
E-Mail Body
– edit the text to be sent. Use the HTML formatting marks in the text.
You can
insert special symbols substituting the username, date & time and device ID.
These
symbols will be replaced with the actual value before sending. Refer to the table of
substitute symbols below:
$User$ Called username
$DateTime$ Current date and time
$DeviceName$ Intercom identification
If the placeholder value is not found in the string, the value is used directly.
