2N Access Unit Configuration Manual Download Page 119

Page: 119 / 134

2N Access Unit Configuration Manual

119

134

1.
2.

•
•
•

•

MODEL in the filename specifies the intercom model:

–

Access Unit

aug2

–

Access Unit

2.0

MACADDR

the MAC address of

the

Access

Unit

the 00-00-00-00-00-00 format. Find the

MAC address on

the

Access

Unit

production

plate or on

the

Status

tab

in the web interface.

Example:

Access

Unit

with

MAC address 00-87-12-AA-00-11 downloads the following files from the

TFTP server:

au-firmware.bin
au-common.xml
au-00-87-12-aa-00-11.xml

List of Parameters

Firmware/Configuration Update Enabled

– enable automatic firmware/configuration

updating from the TFTP/HTTP server.

Address Retrieval Mode

– select whether the TFTP/HTTP server address shall be entered

manually or a value retrieved automatically from the DHCP server using Option 66 shall be
used.

Server Address

– enter the TFTP (

) server address manually.

Summary of Contents for Access Unit







































































































































Search results

Summary of Contents for Access Unit

Reviews:

2N Access Unit, Configuration Manual, Page: 119 / 134

Search results

Summary of Contents for Access Unit

Reviews: