2N Access Unit Configuration Manual
76
/
134
•
•
•
•
•
•
•
•
•
•
•
Module Name
– set the module name for card reader logging purposes.
Door
– set the reader direction (Not specified, Arrival, Departure) for the Attendance
system purposes.
Associated Switch
– set the switch to be activated after user authentication via this
module. If you set Door Lock Switch, the authentication rules specified in Hardware / Door
will be used.
Allowed Card Types
– set the type of a card to be accepted by the card reader. The card
reader supports just one card type at an instant.
Samsung NFC Compatibility
– enable NFC compatibility with the Samsung phones.
Forward to Wiegand Output
– set a group of Wiegand outputs to which all the received
RFID card IDs will be resent.
Touch keypad (serial number)
Module Name
– set the module name for logging events from the touch keypad module.
Door
– set the reader direction (Door Entry, Door Exit) for the Attendance system
purposes.
Blink at Keystroke
– set keystroke light signalling for noisy environments where acoustic
signals are difficult to hear.
Forward to Wiegand Output
– set a group of Wiegand outputs to which all pressed keys
are to be forwarded.
Transmitted Code Format
– select a 4bit or 8bit (higher security) format for the codes to
be transmitted.
