2N Access Unit Configuration Manual
108
/
134
•
•
•
•
•
•
•
•
•
•
Default Interface
–
if enabled, it directs all outgoing network traffic to the VPN interface
outside the LAN mask.
Server Address
– OpenVPN Server Address
Server Port
– OpenVPN Server Port.
Trusted Certificate
– specify a set of certificates issued by certification authorities to
verify the OpenVPN server public certificate validity. Choose one of three certificate sets,
see the Certificates subsection. If no certificate issued by a certification authority is
specified, the OpenVPN server public certificate is not validated.
Client Certificate
– specify a set of client certificates to verify the client’s identity by the
OpenVPN server. Choose one of three certificate sets, see the Certificates subsection. If no
client certificate is specified, the OpenVPN client identity is not validated.
State
– display the OpenVPN connection state: Connected/Disconnected.
Error
– display the OpenVPN connection error type if any.
Start
– connect the device to OpenVPN.
Stop
– disconnect the device from OpenVPN.
VPN
– display the basic information on VPN.
•
Tip
Refer to
for OpenVPN server and client setting details.
