2N Access Unit Configuration Manual
78
/
134
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Module Name
– set the module name for card reader logging purposes.
Door
– set the reader direction (Not specified, Arrival, Departure) for the Attendance
system purposes.
Associated Switch
– set the switch to be activated after user authentication via this
module. If you set Door Lock Switch, the authentication rules specified in Hardware / Door
will be used.
Allowed Card Types
– set the type of a card to be accepted by the card reader. The card
reader supports just one card type at an instant.
Samsung NFC Compatibility
– enable NFC compatibility with the Samsung phones.
Forward to Wiegand Output
– set a group of Wiegand outputs to which all the received
RFID card IDs will be resent.
Bluetooth
(serial number)
Module Name
– set the module name for logging events from the Bluetooth module.
Door
– set the reader direction (Not specified, Arrival, Departure) for the Attendance
system purposes.
Associated Switch
– set the switch to be activated after user authentication via this
module. If you set Door Lock Switch, the authentication rules specified in Hardware / Door
will be used.
Signal Range
– set the maximum signal range, i.e. the distance within which the
Bluetooth module can communicate with the mobile phone:
Short
– less than 2 m for most phones
Long
– maximum possible range
Operation Mode
– set the authentication method for a mobile phone:
Tap in app
– authentication has to be confirmed by tapping on an icon in the
application running in a mobile phone.
Touch mode
– touch the card reader having a phone with paired
2N
®
Mobile Key
to
confirm authentication.
