2N Access Unit, Configuration Manual

Page: 42 / 134

2N Access Unit Configuration Manual
42 / 134
Tip
In case of use external relay part no.: 9137410E are used next HTTP commands:
To turn on the switch – http://ip_address/state.xml?relayState=1 (e.g.: http://
192.168.1.10/state.xml?relayState=1 )
To turn on for pre-defined time (default value is 1.5 s) – http://ip_address/state.xml?
relayState=2 (e.g.: http://192.168.1.10/state.xml?relayState=2 )
To turn off – http://ip_address/state.xml?relayState=0 (e.g.: http://192.168.1.10/
state.xml?relayState=0 )
In case of use external relay part no.: 9137411E are used next HTTP commands
(Symbol X should be replaced with a number of the desired switch):
To turn on the switch – http://ip_address/state.xml?relayXState=1 (e.g.: http://
192.168.1.10/state.xml?relay1State=1 )
To turn on for pre-defined time (default value is 1.5 s) – http://ip_address/state.xml?
relayXState=2 (e.g.: http://192.168.1.10/state.xml?relay1State=2 )
To turn off – http://ip_address/state.xml?relayXState=0 (e.g.: http://192.168.1.10/
state.xml?relay1State=0 )
