2N 01353-001 Installation Manual Download Page 46

Page: 46 / 85

2N TELEKOMUNIKACE a.s., www.2n.cz

46/85

Reset Button

Located among the main unit connectors, the Reset button helps you reset the factory

default values, restart the device, find the device IP address and switch the static

/dynamic mode.

IP Address Finding

Follow the instructions below to

identify the current IP address

Press and hold the RESET button.

Wait until the red and green LEDs go on simultaneously on the device and the

acoustic signal

can be heard (approx. 15–35 s).

Release the RESET button.

The device automatically announces the current IP address.

Note

The delay after pressing RESET till the first light and sound signalling is
set to 15–35 s depending on the 2N IP intercom/answering unit model
used.

24 s is the valid value for

HW version 8.

2N IP Safety

Summary of Contents for 01353-001






















































































Search results

Summary of Contents for 01353-001

Reviews:

Related manuals for 01353-001

Brands by name

Popular brands

2N 01353-001, Installation Manual

Search results

Summary of Contents for 01353-001

Reviews:

Related manuals for 01353-001

Brands by name

Popular brands