2N TELEKOMUNIKACE a.s., www.2n.cz
47/85
Static IP Address Setting
Follow the instructions below to switch on the
mode (DHCP OFF):
Static IP address
Press and hold the RESET button.
Wait until the red and green LEDs go on simultaneously on the device and the
acoustic signal
can be heard (approx. 15–35 s).
Wait until the red LED goes off and the acoustic signal
can be heard
(approx. for another 3 s).
Release the RESET button.
The following network parameters will be set after restart:
IP address: 192.168.1.100
Network mask: 255.255.255.0
Default gateway: 192.168.1.1
Dynamic IP Address Setting
Follow the instructions below to switch on the
mode (DCHP ON):
Dynamic IP address
Press and hold the RESET button.
Wait until the red and green LEDs go on simultaneously on the device and the
acoustic signal
can be heard (approx. 15–35 s).
Wait until the red LED goes off and the acoustic signal
can be heard
(approx. for another 3 s).
Wait until the green LED goes off and the red LED goes on again and the
acoustic signal
can be heard (approx. for another 3 s).
Release the RESET button.
Summary of Contents for 01353-001
