2N 01353-001 Installation Manual Download Page 6

Page: 6 / 85

2N TELEKOMUNIKACE a.s., www.2n.cz

6/85

Basic Features

2N IP Safety

is a highly resistant and reliable IP door access intercom provided with a

lot of useful above-standard functions. Supporting the SIP standard and being

compatible with the leading IP PBX and telephone suppliers,

can make

IP Safety

use of all VoIP services.

can work as a standard or emergency door

IP Safety

access intercom for buildings, entrances to premises or garages, manufacturing halls,

highways and so on.

IP Safety

is equipped with two very sensitive microphones and an up to 10 W

loudspeaker. Thanks to an integrated acoustic echo cancelling (AEC) system, the

product provides mutual audibility even of persons talking at the same time under

normal conditions.

2N IP Safety

can be provided with pre-programmed buttons. You can set up to three

telephone numbers and time profiles for each of the buttons to increase the

accessibility of the called party.

2N IP Safety

is equipped with an electric lock switch. You can control the switch

using a numerical keypad or, during a call, using any telephone set. An additional

switch module can be installed if necessary. A wide range of settings allow for a

variety of applications.

2N IP Safety

is very easy to install. All you have to do is connect the system into your

LAN via a network cable and feed it from a 12 V power supply or your PoE supporting

LAN.

Configure

using your PC via any web browser. Use the

2N IP Safety

to manage extensive

systems easily and

2N Access Commander

2N IP Safety

quickly.

Summary of Contents for 01353-001






















































































Search results

Summary of Contents for 01353-001

Reviews:

Related manuals for 01353-001

Brands by name

Popular brands

2N 01353-001, Installation Manual

Search results

Summary of Contents for 01353-001

Reviews:

Related manuals for 01353-001

Brands by name

Popular brands