2N TELEKOMUNIKACE a.s., www.2n.cz
61/85
Function:
The
is a device installed between an intercom (outside the secured
2N Security Relay
®
area) and the electric lock (inside the secured area). The
includes
2N
Security Relay
®
a relay that can only be activated if the valid opening code is received from the
intercom.
Specifications:
Passive switch: NO and NC contacts, up to 30 V / 1 A AC/DC
Switched output:
Where the security relay is fed from the intercom, 9 to 13 V DC is available on
the output depending on the power supply (PoE: 9 V; adapter: source voltage of
minus 1 V) / 400 mA DC.
Where the security relay is fed from an external power supply, 12 V / 700 mA DC
is available on the output.
Dimensions: 56 x 31 x 24 mm
Weight: 20 g
Installation:
Install the
onto a two-wire cable between the intercom and the
2N IP Security Relay
®
electric lock inside the area to be secured (typically behind the door). The device is
powered and controlled via this two-wire cable and so can be added to an existing
installation. Thanks to its compact dimensions, the device can be installed into a
standard mounting box.
Summary of Contents for 01353-001
