P. 9
Fxbox 2.0 User Manual
1/22/19
3:54 PM
v. 2.0
Copyright ©1010music LLC 2019
Working in Flipped Mode
When the value for
Flip UI
is set to
ON
, the user interface on the touch screen will be inverted. Use this setting when the
module is installed in a rack with the touchscreen on the bottom. When flipped, the firmware adjusts how the buttons,
Control Knobs and CV Trigger jacks are mapped to the user interface. One noteworthy change is that the
HOME
and
INFO
buttons now reverse functions. This is done so that HOME is always on the left and INFO is always on the right. The
alignment of the Control Knobs in this mode is slightly high compared to the parameters on the touch screen. However, the
top left control knob will control the top left parameter, and the lower right control knob will control the lower right
parameter. The CV Trigger inputs are also now mapped to the inverted display. The Input Jacks and Output Jacks maintain
their original assignments. On the Chain Management Screen, the position of Chain A and Chain B are swapped so that
they align to the layout of their related outputs. Figure 7: Inverted Faceplate shows the faceplate labels for an inverted
module. You can purchase a Series 1 inverted faceplate on our website at 1010music.com.
Figure 7: Inverted Faceplate
