P. 16
Fxbox 2.0 User Manual
1/22/19
3:54 PM
v. 2.0
Copyright ©1010music LLC 2019
Label Effect
Parameter
Settings
Mod
Target?
Trigger
ON:
the effect is constantly applied.
Gate:
effect is triggered via CV input, momentary touch,
MIDI input, or the step sequencer.
No
RVRS
Reverse
(none)
VNYL
Turntable and similar
effects including
scratching, tape stop,
and backspin
Mode
Tape Stop:
a quick ramp down of pitch
Scratch:
back and forth scrubbing of the sound
Powerdown:
a gradual reduction in speed, eventually
leading to no audio
Backspin:
reverse playback with slowdown of the pitch
No
Visually Monitor the Effects
The fxbox changes the display of the grid to show the state of the effects. The table below describes what the icons and
color changes indicate:
User Interface
Example
Description
What it means
Cell highlighted pink
The cell is selected. Pressing the INFO button will
show the details for this cell.
Red bar across the top of the cell
The effect is bypassed and will not be heard
Unfilled blue bar across the bottom of the
cell
The Trigger for the effect is set to On.
Filled blue bar across the bottom of the cell
The effect has been triggered by a CV signal, the Step
Sequencer, or touching it.
Cell highlighted Red or Green
Fxbox is in bypass mode. Red cells are bypassed.
Press the
Home
button to exit bypass mode.
Blue bar with a vertical line moving across it
at the bottom of an EXT grid cell
A bar graph appears along the bottom of the
EXT
grid cells that represents the value of the
corresponding CV input. The middle is zero, max is
+5 Volts, min is -5 Volts.
