manualshive.com logo in svg

1010music Bitbox 3.0, User Manual

Share
Download
1010music Bitbox 3.0 User Manual Download Page 68

UPDATE AND SWAP FIRMWARE

Owners of Series 1 modules can update the module’s firmware to get the latest features
and other updates. This process can also be used to convert a module to run any
Series 1 firmware. This means that your bitbox can be converted to a synthbox or an
fxbox and then back again. You can also install bitbox firmware on your fxbox or
synthbox. The firmware can be updated with the factory image, which includes the
original presets, or just the firmware itself. You can also choose individual presets to
copy over to your microSD Card.

Switch to a New MicroSD Card While Operating Bitbox

You can switch to a different microSD card while operating bitbox. Simply remove the
current card and insert the new one, then load a preset from the new card as usual.

Backup Your Presets and WAV Files

Before you re-use a microSD to update or swap firmware, backup the files that are
stored on the microSD card:

1.

Remove the microSD card from your module and insert into your computer.
You may need to use a microSD adapter.

2.

Copy the files from the microSD card onto your computer.

Install New Firmware

Here are the steps required:

1.

Backup your microSD card as described above.

2.

Download the desired firmware onto your computer. You can choose to
download either synthbox, fxbox or bitbox firmware, but only one set of
firmware can run at a time. You can find the latest firmware images on the
forum at

https://forum.1010music.com

. You must be a registered user of the

forum to access the download files. Forum registration is free.

3.

Unpack the zip file. Some browsers do this automatically for you. Make sure
the files you downloaded saved with a file named Matrix.bin. Sometimes if
you have downloaded an update in the past, the new file will be automatically
renamed with a number in the name. Rename the file if needed.

4.

Prepare a microSD card with the FAT32 format. The card that comes with
your module is formatted properly, but you may need to reformat a card that
came from somewhere else. Make sure you only have the files from one
Series 1 module on the microSD card at a time.

5.

If you want to replace the Presets with the factory image, copy the full
contents of the zip file onto a microSD card. If you do not want to overwrite
your presets, copy only the MATRIX.BIN file to the microSD card.

Copyright 1010music LLC 2020

Page 68 of 72

Bitbox 3.0.1 User Manual

Summary of Contents for Bitbox 3.0









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands