Page
Parameter
Description
Rec
RecToPlay
If you have RecToPlay set to ON, bitbox will automatically start
to play the new sample when recording ends if the Length
parameter was set to a value other than Custom for recording.
RecConfig
When this is set to Global, changes made to recording settings
on the Pad Loading and Recording screen will apply to all
empty pads. When this is set to Per Pad, these changes only
change the current pad and do not change what is used for
other empty pads. Use Per Pad when you want to set up a
Template preset with different recording configurations for
each pad.
MIDI In
MIDI Pads
Specifies which MIDI channel is used to trigger pads. If a
channel selected here is also chosen as the MIDI IN channel
for a pad, that pad will also play notes in response to signals
received on this MIDI channel. See the section
below for more information.
When this parameter is set to Omni, pad hits and can be
triggered by all MIDI channels. However, any MIDI channel
that is assigned as the MIDI In for a pad or as the MIDI Keys
parameter will be excluded from the list of channels that will
trigger pad hits when MIDI Pads is set to OMNI.
MIDI Program Change messages received on this channel will
be processed by bitbox if the ProgChange parameter is set to
ON.
ProgChange When set to ON, bitbox will respond to MIDI program change
messages received on the MIDI Pads and MIDI Keys channels
by opening the Preset that maps to the specified program
number. See the section
below
for more information. Program change messages on other
channels will be ignored.
Remember that bitbox does not automatically save changes.
This means that when you change presets you will lose any
unsaved changes.
Copyright 1010music LLC 2020
Page 14 of 72
Bitbox 3.0.1 User Manual
