manualshive.com logo in svg

1010music Bitbox 3.0, User Manual

Share
Download
1010music Bitbox 3.0 User Manual Download Page 26

You can also set the values for Start, Len, LpStr and LpEnd from the Waveform screen.
When viewing the waveform, the pink frame on the large waveform represents the Start
and Len parameters. You can move these end points by turning the top two control
knobs. If Loop Mode is set to Forward or Bidirect, you will also see a white frame within
the pink frame that defines the Loop Start and Loop End points. Use the bottom two
control knobs to adjust these end points. The corresponding values for the end points
are displayed above and below the large waveform. The sensitivity of the control knobs
depends on the Zoom level. Zoom out to make big adjustments then zoom in to make
fine adjustments.

Multi-Sample Cells

Multi-sampling is a useful tool for improving the sound quality when playing samples
pitch shifted, and when you want to map a number of different WAV files to different
keys on the keyboard.

If you have a number of samples of a single instrument at various pitches with root
notes defined for each WAV file, you can map these samples together to reduce the
amount of pitch shifting required to play a broad range of notes. Put the files you want to
use in one multi-sample pad into a single directory by themselves. There are several
folders of samples like this in the \Symplesound folder available for download from the
forum. To load one of these sample banks into a pad:

1.

Push Home to go to the Main screen.

2.

Select a pad by touching it or using the control knobs to cycle through the
pads. (The top control knobs move the selection horizontally. The bottom
control knobs move the selection vertically.) The selected pad is highlighted
pink.

3.

Press the INFO button. If the pad was empty, the Load and Record screen
will be displayed. If the pad already had a WAV file assigned, the Waveform
screen will be displayed. If you are on the Load and Record screen, touch
Load in the top menu bar. If you are on the Waveform screen, touch the name
of the WAV file at the top of the screen. You will now be on the WAV file
selection screen.

4.

From the WAV file selection screen, Use the control knobs to scroll through
the list of files and directories. The selected file name has a blue highlight.
When looking at the list of files, list items that start with a slash \ are
directories. Load a directory to see its contents. The file path is displayed
above the list of files. Touch the caret ^ to go back to the previous directory.
Highlight one of the files in the directory of samples that you want to load into
the pad. A good example of a directory to use with multi-samples is
\Symplesound\Housepiano. You can select any file within that directory.

5.

Touch File and then Load All.

Copyright 1010music LLC 2020

Page 26 of 72

Bitbox 3.0.1 User Manual

Summary of Contents for Bitbox 3.0









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands