Modulate Pad Parameters
Bitbox allows you to modify the values of pad parameters
in real time using external signals. For example, you can
use MIDI Velocity to control the Level of a pad, or EXT1
to adjust the filter. You can use a Trigger or CV input to
control which slice of a Slicer pad will be played on the
next note event. The parameter tables in this document
indicate which parameters can be used as modulation
targets. On the parameter screens you can easily identify
the modulation targets by the three black boxes that
appear below them. You can use up to three different
signal sources to modulate each parameter. The same
signal can be used to modulate multiple parameters.
To Apply CV or MIDI Modulation:
1.
From the Main screen, touch the pad you want
to modulate.
2.
Press INFO twice to display the Parameters
screen, then touch the page tab for the
parameter you want to modulate.
3.
Touch one of the three black boxes below the
parameter to display the Modulation
Parameters screen.
4.
Use the control knobs to select a value for the
Source parameter. This parameter specifies
which signal will be used to control this
parameter. Available sources are shown in the
table on the next page.
Parameters screen with
Modulation Targets
Modulation Parameters
Screen
Page 55 of 72
Copyright 1010music LLC 2020
Bitbox 3.0.1 User Manual
