Prestige 100MH PSTN Router/Hub
4-5
Chapter 4
Remote Node Configuration
Table 4-4.
Remote Node Profile Menu Fields for Dial-up Line Applications
(continued)
Field
Description
Edit PPP Options
To edit the PPP options for this remote node, move the cursor to this
field, use the space bar to select [Yes] and press [Enter] . This will
bring you to Menu 11.2 - remote node PPP Options. For more
information on configuring PPP options, see the section Editing PPP
Options.
IP Addr
This is a required field. Enter the IP address of this remote node.
Edit IP
To edit the parameters, select [Yes] and press [Enter]. This will bring
you to Menu 11.3 - Remote node Network Layer Options. For more
information on this screen, refer to the
Chapter 6
pertaining to the
TCP/IP protocol.
Edit Script Options
To edit the parameters, select [Yes] and press [Enter]. This will bring
you to Menu 11.4 - Remote node Script Options.
Telco Options:
Allocated Budget
(min)
This field will set a budget outgoing call time for the remote node.
The default for this field is [0] for no budget control.
Period (hr)
This field will set the time interval to reset the above outgoing call
budget control.
Session Options:
Input Filter Sets,
Output Filter Sets
and Call Filter Sets
In these fields, select which filter set(s) you would like to implement
to filter the incoming and outgoing traffic between this remote node
and your
Prestige
. You can choose from 12 different filter sets. In
addition, you can link up to 4 filter sets together for further
customization (for example, 1, 5, 9, 12). The default is Blank.
Note that spaces are accepted in this field.
For more information on customizing your filter sets,
see Chapter 7
.
The default is blank, that is, no filters defined.