Prestige 100MH PSTN Router/Hub
2-17
Chapter 2
Hardware Installation & Initial Setup
Table 2-7 below describes the call control parameters.
Table 2-7.
Advanced Modem Setup Call Control Parameters
Field
Description
Dial Timeout (sec) The
Prestige
will disconnect if it can not set up an outgoing call within the
timeout value.
The default in this field is [60] seconds.
Retry Counter
How many times a busy or no-answer phone number is retried before it is
put on the blacklist.
The default in this field is [0] to disable the blacklist control.
Retry Interval
(sec)
Elapsed time after a call fails before another call is retried. Applies before a
phone number is blacklisted.
Call Back Delay
(sec)
Elapsed time between dropping a callback request call and dialing a
callback call.
The default in this field is [15] seconds.