manualshive.com logo in svg

ZyXEL Communications ZyXEL Prestige 100MH, Руководство пользователя, Страница: 104 / 129

Поделиться
Скачать
ZyXEL Communications ZyXEL Prestige 100MH Скачать руководство пользователя страница 104

Prestige 100MH PSTN Router/Hub   

9-2 

Chapter 9

 Telnet Configuration and Capabilities 

9.2  Single Administrator 

To prevent confusion and discrepancy on the configuration, your 

Prestige

 will only allows one 

user to login at any time. Your 

Prestige

 also gives priority to the console port over telnet. If 

you have already connected to your 

Prestige

 via telnet, you will be logged out if another user 

is connecting to the 

Prestige

 via the console port.   

9.2.1   System Timeout 

There is a system timeout of 5 minutes (300 seconds) for either the console port or telnet. 
Your 

Prestige

 will automatically log you out if there is no activity during this timeout period, 

except for when the 

Prestige

 is continuously updating the status in Menu 24.1. 

 

 

Содержание ZyXEL Prestige 100MH


































































































































Отзывы:

Нет отзывов