Prestige 100MH PSTN Router/Hub
3-6
Chapter 3
Internet Access Application
Follow the instructions in Table 3-1.on how to configure the DHCP fields.
Table 3-1.
DHCP Ethernet Setup Menu Fields
Field
Description
DHCP
If DHCP=Server:
This field determines the mode of DHCP support. If set to [None],
DHCP will not be used. If it is set to [Server], your
Prestige
will act
as a DHCP server.
The default in this field is [Server].
When DHCP is used, the following four items need to be set:
Client IP Pool Starting
Address
The Client IP Pool Starting Address gives the first address in the
pool.
The default in this field is 192.168.1.33
Size of Client IP Pool
The count of the IP addresses in the pool.
The default in this field is 32.
Primary and Secondary
DNS Server
Enter the IP address of the DNS server(s) provided by your ISP or
network administrator.
Table 3-2 contains instructions on how to configure your
Prestige
for TCP/IP Ethernet Setup.
Table 3-2.
TCP/IP Ethernet Setup Menu Fields
Field
Description
TCP/IP Setup
IP Address
Enter the IP address of your
Prestige
in dotted decimal notation.
The default in this field is 192.168.1.1.
IP Subnet
Mask
Enter the subnet mask of your
Prestige
.
The default in this field is 255.255.255.0.
RIP
Direction
This parameter determines how your
Prestige
handles RIP traffic
(In/Out/both/none).
The default in this field is [Both].
Version
Version of RIP packets sent by the
Prestige
. The default in this field is RIP-1.
When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm…] to
save your selections, or press [Esc] at any time to cancel.