Prestige 100MH PSTN Router/Hub
4-4
Chapter 4
Remote Node Configuration
Table 4-3.
Remote Node Profile Menu Fields for Dial-up Line Applications
(continued)
Field
Description
Incoming:
Call Back
This field will be valid only if [Call Direction] is [Both]. Otherwise, an
[N/A] appears in the field.
This field determines whether or not your
Prestige
will call back after
receiving a call from this remote node.
If this option is enabled, your
Prestige
will disconnect the initial call
from this node and call it back at the Outgoing Primary Phone
Number (see below).
Outgoing:
My Login
Name
This is a required field if [Call Direction] is either [Both] or [Outgoing].
Enter the login name when calling this remote node.
Outgoing:
My
Password
This is a required field if [Call Direction] is either [Both] or [Outgoing].
Enter the password for your
Prestige
when it calls this remote node.
Outgoing:
Authen
This field sets the authentication protocol allowable when the
Prestige
calls this remote node.
Options for this field are:
l
CHAP/PAP - Your Prestige will agree to either CHAP or PAP
when requested by the remote node.
l
CHAP – Use CHAP only
l
PAP – Use PAP only.
Outgoing:
Pri(mary)
Sec(ondary)
Phone
Numbers
Both the Primary Phone number and the Secondary Phone number
refer to the number that your
Prestige
will dial to connect to the
remote node. Your
Prestige
will always call the remote node using
the Primary Phone number first.
If the Primary Phone number is busy or does not answer, your
Prestige
will call the Secondary Phone number if available.
Some areas require dialing the pound sign # before the phone
number for local calls. A # symbol may be included at the beginning
of the phone numbers.