ZyXEL Communications ZYAIR G-1000, Руководство пользователя

Страница: 137 / 197

ZyAIR G-1000 Access Point User’s Guide
System Maintenance and Information 18-1
Chapter 18
System Maintenance and Information
This chapter leads you through SMT menus 24.8 to 24.11.
18.1 Command Interpreter Mode
The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same
functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from
the SMT by selecting menu 24.8. See the included disk or the zyxel.com web site for more detailed
information on CI commands. Enter 8 from
Menu 24 – System Maintenance . A list of valid commands
can be found by typing
help
or
?
at the command prompt. Type “exit” to return to the SMT main menu
when finished.
Figure 18-1 Menu 24 System Maintenance
Figure 18-2 Valid CI Commands
Menu 24 – System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:
Copyright (c) 1994 - 2003 ZyXEL Communications Corp.
B-3000> ?
Valid commands are:
sys exit device ether
config wlan ip ppp
bridge hdap cnm radius
8021x
G-1000>