ZyXEL Communications ZYAIR G-1000, Руководство пользователя

Страница: 48 / 197

ZyAIR G-1000 Access Point User’s Guide
5-8 Wireless Configuration and Roaming
3. The adjacent access points should use different radio channels when their coverage areas overlap.
4. All access points must use the same port number to relay roaming information.
5. The access points must be connected to the Ethernet and be able to get IP addresses from a DHCP
server if using dynamic IP address assignment.
To enable roaming on your ZyAIR, click ADVANCED , WIRELESS and then the Roaming tab. The screen
appears as shown.
Figure 5-7 Roaming
The following table describes the labels in this screen.
Table 5-2 Roaming
LABEL DESCRIPTION
Active Select Yes from the drop-down list box to enable roaming on the ZyAIR if you have two or
more ZyAIRs on the same subnet.
All APs on the same subnet and the wireless stations must have the
same ESSID to allow roaming.
Port Enter the port number to communicate roaming information between access points. The
port number must be the same on all access points. The default is
16290 . Make sure this
port is not used by other services.
Apply Click Apply to save your changes back to the ZyAIR.
Reset Click Reset to begin configuring this screen afresh.