ZyXEL Communications ZYAIR G-1000, Руководство пользователя

Страница: 74 / 197

ZyAIR G-1000 Access Point User’s Guide
8-4 Logs Screens
Table 8-2 Log Settings
LABEL DESCRIPTION
Mail Server Enter the server name or the IP address of the mail server for the e-mail addresses
specified below. If this field is left blank, logs and alert messages will not be sent via
e-mail.
Mail Subject Type a title that you want to be in the subject line of the log e-mail message that the
ZyAIR sends.
Send Log To Logs are sent to the e-mail address specified in this field. If this field is left blank,
logs will not be sent via e-mail.
Send Alerts To Enter the e-mail address where the alert messages will be sent. If this field is left
blank, alert messages will not be sent via e-mail.
Syslog Logging Syslog logging sends a log to an external UNIX server used to store logs.
Active Click Active to enable Syslog Logging.
Syslog IP Address Enter the server name or the IP address of the syslog server that will log the CDR
(Call Detail Record) and system messages.
Log Facility Select the Local from the drop down list box. The log facility allows you to log the
messages to different files in the syslog server. Refer to your UNIX manual for more
information.
Send Log
Log Schedule This drop-down menu is used to configure the frequency of log messages being
sent as E-mail:
•
Daily
•
Weekly
•
Hourly
•
When the Log is Full
•
None.
If the Weekly or the Daily option is selected, specify a time of day when the E-mail
should be sent. If the Weekly option is selected, then also specify which day of the
week the E-mail should be sent. If the When Log is Full option is selected, an alert
is sent when the log fills up. If you select None , no log messages are sent.
Day for Sending Log This field is only available when you select Weekly in the Log Schedule field.
Use the drop down list box to select which day of the week to send the logs.
Time for Sending Log Enter the time of the day in 24-hour format (for example 23:00 equals 11:00 pm) to
send the logs.
Log Select the categories of logs that you want to record.