ZyXEL Communications WX3401-BO, Руководство пользователя

Страница: 23 / 180

Chapter 2 Hardware
WX3401-B0 User’s Guide
23
• Repeater mode (the WX3401-B0 to the wireless client)
1. Press the WX3401-B0 WPS button twice within 8 seconds to copy the WiFi settings from the WX3401-
B0 to a wireless client, such as your smartphone or laptop.
2. Wait until the WPS LED blinks.
3. Press the WPS button on the client within 2 minutes.
• Repeater mode (Downlink Daisy Chain For MPro Mesh)
1. Press the fi rst WX3401-B0 WPS button twice within 8 seconds.
2. Press the WPS button once on the downlink WX3401-B0 within 2 minutes of each other.
Note: You must activate WPS in the WX3401-B0 and in another wireless device within two
minutes of each other.
Note: With WPS, wireless clients can only connect to the 5 GHz or 2.4 GHz wireless network
using the first 5 GHz or 2.4 GHz SSID on the WX3401-B0 (in AP or repeater mode).
2.5 RESET Button
If you forget your password or you cannot access the Web Configurator, you will need to use the RESET
button at the back of the WX3401-B0 to reload the factory-default configuration file. This means that you
will lose all configurations that you had previously saved, the password will be reset to the default key on
the device label.
2.5.1 Using the RESET Button
1
Make sure the power LED is on (not blinking).
2
Press the RESET button for longer than five seconds to set the WX3401-B0 back to its factory-default
configurations.