ZyXEL Confidential
340QR5C1.doc
12/38
for a loop and the Web GUI can't get response and just like locked.
Condition: N/A
4. [BUG FIX]
Symptom: Multiple remote nodes are configured with different QoS (CBR/VBR/UBR)
types, but the traffic transmitting rates are all the same. The schedule priority should be
CBR > VBR > UBR
Condition: N/A
5. [BUG FIX]
Symptom: Any-IP doesn’t work fine when Any-IP PC uses Windows XP as OS.
Condition: N/A
6. [BUG FIX]
Symptom: Enable Anti-Virus to scan HTTP packets, and access Web GUI from WAN
side, some pages can’t display correctly.
Condition: N/A
7. [BUG FIX]
Symptom: Enable Anti-Virus to scan email, and system will cause exception if the
length of filename is over then 64.
Condition: N/A
Solution: Extend the max length of filename to be 255 for Anti-Virus.
8. [BUG FIX]
Symptom: In Anti-Virus, system will only notify user one time if there are many
viruses found on different attachments.
Condition: N/A
9. [BUG FIX]
Symptom: If SMT4 ISP node is cleared, and doing VC auto-hunt system will get
exception
Condition: N/A
10. [BUG FIX]
Symptom: Device will reply wrong packet when system is configured as ENET
ENCAP
Condition: Use IES-1000 as ATUC, and CPE device uses ENET ENCAP and NAT is
turn off.
Solution: Only receive packets that destination MAC are to device or it’s broadcast/
multicast packets
11. [FEATURE ENHANCE]
Symptom: Support one CLI command to enable/disable SIP ALG. This value will be
saved in ROM file
Condition: N/A
12. [FEATURE ENHANCE]
Symptom: Support Anti-Virus in Web logs page.
Condition: N/A
13. [FEATURE ENHANCE]
Symptom: Support Media Bandwidth Management Wizard, and also add dynamic
service for FTP, and H.323 in Bandwidth Management.
Condition: N/A
