ZyXEL Confidential
340QR5C1.doc
16/38
Symptom: Configure more than 5 entries in VC hunt table, Restart device. VC auto
hunt will start. Start the IE, and will see the "Wait..." information. Wait a moment, the
IE will show "hunt successfully page"(error) Restart IE, page will show PPPoE
need username and password page. Enter the user name and password and click
"Apply". IE will re-display the setup page for username and password. SMT shows
“dial fail, no interface available”.
Condition: N/A
5. [BUG FIX]
Symptom: When we turn on debug flag of zero configuration “wan zero debug 1” and
DSL link down, system will get exception
Condition: N/A
Solution: Remove the logs in DSL down.
6. [BUG FIX]
Symptom: Using Apple computer (PowerBook G4) can’t get IP address from router by
DHCP, disable Any-IP can fix this problem
Condition: It’s caused by Any-IP function
7. [BUG FIX]
Symptom: Configured as 802.1x Dynamic WEP key, re-authentication timer is 60sec,
after 60 sec, the client can’t ping out
Condition: N/A
8. [BUG FIX]
Symptom: Configured as WPA Mixed mode enabled, the client connect with 802.1x
Dynamic WEP first, and then switching to WPA client will fail
Condition: N/A
9. [FEATURE ENHANCE]
Symptom: The Web help of Any-IP is ready
Condition: N/A
10. [FEATURE ENHANCE]
Symptom: Boot module is upgraded to 1.06 version, it’s to support 32M DRAM
Condition: N/A
11. [FEATURE CHANGE]
Symptom: In centralized log, the schedule to send log is “when log is full”.
Condition: N/A
Solution: Change the schedule of send log to be “none”.
12. [BUG FIX]
Symptom: In SMT, configured as WPA-PSK, and radius server is not active, then
system will return error message.
Condition: N/A
Solution: System should not return error message because WPA-PSK doesn’t need
Radius server.
13. [BUG FIX]
Symptom: When firewall is turn on, SIP can’t pass through
Condition: N/A
Modifications in V 3.40(QR.0)b4 | 04/06/2004
1. [BUG FIX]
